Filter
Top Products
50
Service Manual
Third edition, June 1997
The RS-485 Interface Board can be set to half or full duplex,
using jumpers. In this window it is easy to check the setting
of the jumpers. See chapters 9.4 and 4.3.
Hit the Communication Log-button and select the communi-
cation you want to view. The Communication Log-window
shows the communication parameters as well as the mes-
sages that are communicated.
You can disregard the information in the Mode-box. The
information about the Auto RTS is only used by the Saab
Marine service engineers or the service agents.
3.31 The I/O-Window
The I/O-window shows the raw values of the signals in and
out of the terminals of, for example, the I/O Box and SIOX
modules. Hit the Terminals-button to select which terminal
you want to look at.
Hit the Terminals-button to show a list of the available termi-
nals. Select one of the shown terminals.
The Scale-button shows the scalings available for showing
the raw values as current or voltage.