Filter
Top Products
User’s manual maps + more
Navigation - 55 -
Saving routes
The ROUTES AND TRACKS window is open. You have entered the
starting point and at least one route point.
1. Tap on Options > Save route.
2. Enter a name for the route.
3. Tap on (Save).
If a route has already been saved under this name, you will be
notified accordingly.
► Tap on Yes to overwrite the route
- or -
► Tap on No if you want to enter a different name.
The destination is now saved to the SAVED ROUTES AND TRACKS list.
The dialog window closes.
7.4.5 Loading routes or tracks
1. Tap on Options > Saved routes and tracks.
The SAVED ROUTES AND TRACKS list opens. It shows all the saved
routes and tracks in alphabetical order.
A symbol in front of the name indicates whether it is a route ( )
or a track ( ).
If you want to load a route:
2. Tap on the route that you want to load.
3. Tap on (Load route).
The ROUTES AND TRACKS window opens. The starting point and the
route points of the loaded route have been entered. When
navigation starts, the starting point is replaced by the current
position. You will now be guided to the first route point.
If you want to load a track:
2. Tap on the track that you want to load.
3. Tap on Load track.
The ROUTES AND TRACKS window opens. The current location is
entered as the starting point. The loaded track is entered as route
point '1'. The navigation system will then guide you first to the
starting point of this track.
For details about navigating along recorded tracks refer to chapter
"Navigation in Track mode" on page 72.