Filter
Top Products
User’s manual maps + more
Operating the navigation system - 23 -
GPS
The GPS symbol can show the following GPS reception states:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact us if the problem persists (see "Questions about the product"
on page 10).
No signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS ready: Data is being received from at least 3 satellites. Position
can be calculated.
For details of the GPS status refer to chapter "GPS status, saving the
current location" on page 94.
Track
The (Record track) symbol indicates that a track is being recorded
at this moment.
For more information about tracks refer to chapter "Tracks" on page 83.
Compass
The Compass symbol is available only in the map view. It shows you in
which direction you are currently moving. It can indicate the following
points of the compass: N, NE, E, SE, S, SW, W, NW.
Showing and hiding the Compass symbol
You can activate and deactivate the Compass symbol so that it is
shown or hidden.
► In the NAVIGATION window tap on More functions > Settings >
Navigation.
► Scroll with the (To the left) and (To the right) buttons
until you see the Display compass setting.
The currently valid setting value is highlighted (red).
► Tap on the (Toggle) button to alternate between the setting
values.
► Tap on OK.