Filter
Top Products
User’s manual maps + more
- 24 - Operating the navigation system
Energy
The Energy symbol can indicate the following states of the integrated
battery:
The device is mounted in the vehicle and is being supplied with power
from the vehicle. The battery is fully charged.
The device is mounted in the vehicle and is being supplied with power
from the vehicle. The battery is being charged.
The device is mounted in the vehicle and is being supplied with power
from the vehicle. The battery cannot be charged because its
temperature is too high or too low.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Live Services
This section is relevant for you only if your navigation device was ever
connected to a tethering-capable smartphone.
Note: The Live Services symbol will not be shown if you have selected
No as the setting for Use Live services in the Live services settings
(see "Configuring the Live services" on page 160).
The Live Services symbol indicates the availability of the Live services.
The following states can be symbolised:
(Red) No Live Services: There is no connection yet to the Live server.
This can be due to the following:
► There is no Bluetooth connection between the navigation device
and a smartphone (see "Bluetooth connection" on page 141).
► There is no smartphone selected as the Internet access point (see
"Using the smartphone's Internet connection" on page 157).
(Red) Connecting: The number on the symbol indicates which
smartphone has been selected as the Internet access point. There is no
connection yet to the Live server. This can be due to the following:
► A Bluetooth connection was set up between the navigation device
and the smartphone, but the smartphone is configured in such a
way that it is unable to make its Internet connection available to
other devices (no tethering). For details please refer to the user
manual issued for your smartphone.