Filter
Top Products
User’s manual maps + more
- 104 - Useful functions
Traffic information
If a new traffic message concerning the Multi-Stop route arises while
navigation is in progress, the Traffic information button will appear at
the right edge of the screen. This traffic message will be treated in
automatic mode (see "Preview TMC" in the section "Recalculate route:
Automatically" on page 106).
10.17.2 Driving range warning
Note: This function is available only when:
► GPS reception is good enough for positioning purposes
► the navigation device is correctly inserted in its cradle.
► the vehicle ignition is on.
► range warning was activated in the settings.
The system continuously calculates the current driving range possible
with the CNG tank and warns you if this range is only just enough to
reach your destination or the next fuelling station with a CNG pump.
This is always assumed to be the case if the distance to the destination
or to the fuelling station with a CNG pump is more than 90% of the
current range of the CNG tank.
Note: The remaining driving range can be viewed at any time in the
TRIP COMPUTER window.
► In the START window tap on Car info > Trip computer (see also "Trip
computer" on page 111).
Activating the range warning
1. In the NAVIGATION window tap on Options > Settings > Navigation.
2. Set the Driving range warning setting to Yes.
Range warning during navigation
You will be warned if one of the following cases arises:
► The range of the CNG tank is reduced to such an extent that you
can only just reach your destination.
► You are navigating along a multi-stop route. The range of the CNG
tank is reduced to such an extent that that you can only just reach
the next interim destination.
► The range of the CNG tank is reduced to such an extent that you
can only just reach the next fuelling station with a CNG pump.
This can be the case e.g. if you consume more CNG than was
calculated at the beginning of the navigation.