Filter
Top Products
User’s manual maps + more
- 106 - Useful functions
► Set Source of traffic information to radio stations.
► If you use the Live services again and the Source of traffic
information setting is set to radio stations, you must change the
setting back to Live services (see "Configuring the Live services" on
page 160).
10.18.1 Preview TMC
If a new traffic message concerning your route arises while navigation is
in progress, the Traffic information button will appear at the right edge
of the screen.
Recalculate route: Automatically
If you have selected Automatically for the Recalculate route setting, the
button will not show a distance. The traffic obstruction will be avoided
automatically if this can justifiably shorten the trip. If not, the traffic
information will be ignored.
Recalculate route: On request
If you have selected On request, then the distance to the reported traffic
obstruction will be indicated on the button.
Note: During navigation on a Multi-Stop route, traffic obstructions will
be avoided automatically if this can justifiably shorten the trip.
The button will turn red if the distance is less than 50 km.
► Tap on the (Traffic information) button.
The PREVIEW TMC window opens. It shows a map view with the
route section affected by the message. If the reported obstruction is
likely to involve a considerable loss of time, a possible detour will
also be shown.