Filter
Top Products
User’s manual maps + more
Switching the navigation device on and off - 17 -
► Off: When you switch off the device, it consumes no energy. It can
then take several months for the battery to become flat. Switching
the device on again triggers a restart which can take some time
(approx. 60 seconds). Your settings and your saved destinations
and routes will be retained.
The procedure for switching the navigation device on and off depends
on whether it is mounted in the vehicle or not.
3.1 Device mounted in the vehicle
When the navigation device is mounted in the vehicle, it does not need
to be switched on or off.
3.1.1 Switching on the device
The navigation device switches on when you switch on the ignition.
Note: The device also switches on when it is fitted in the vehicle while
the ignition is already on.
If the navigation device was previously set to standby, the window
which was last visible will appear.
If the device was previously switched off, it will take several seconds for
the software to be started again. The S
TART window then appears.
If you want to switch on the device with the engine off, press and hold
the (On/Off) key until the device switches on.
3.1.2 Screensaver
Switching on the screensaver
The screensaver is available only under the following conditions:
The device is mounted in the vehicle and is on.
The vehicle's ignition is on.
► Press briefly on the (On/Off) key.
- or -
► In the START window tap on (Switch off).
The screensaver will appear. On it you can see the date, the time and
the outdoor temperature.