Filter
Top Products
User’s manual maps + more
- 148 - Handsfree module
13.4 Making a call
With the hands-free module you can make a call in various ways:
13.4.1 Making a call with the voice commands function
It is particularly convenient to make a call with the voice commands
function.
1. In the H
ANDSFREE MODULE window activate the mobile phone which
you want to use to make the call (see "Activating a mobile phone"
on page 144).
2. In the H
ANDSFREE MODULE window tap on Voice command.
► Then say "Call".
The V
OICE COMMAND window opens.
Specifying a phone number
3. Say "Telephone number".
Say the number that you want to call.
Note: You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
4. Wait for the numbers you said to appear.
Repeat steps 3 to 4 until the complete phone number is shown on
the display. Say "Correction" if the last number you said was not
understood correctly.
5. Say "Call".
The phone number will be dialled.
Calling a contact from the phone book
3. Say "Phone book".
4. Say the name of the contact you want to call.
If several entries are recognised as matching this name, a list with
these entries will appear.
► Say the number in front of the contact that you want to call.
If several phone numbers are saved for this contact, a list with
these numbers will appear.
► Say the number in front of the phone number that you want to call.
The connection will be established.