Filter
Top Products
User’s manual maps + more
Troubleshooting - 167 -
17 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the navigation system.
This list does not claim to be complete. Answers to many other
questions can be found on the Garmin Würzburg GmbH website (see
"Questions about the product" on page 10).
I have connected a charger to the navigation device. A connection to a
computer is shown on the screen.
- or -
I have connected the navigation device to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
- or -
The USB connector is not connected correctly.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Insert the USB connector from the charger into the corresponding
socket of the navigation device swiftly as far as it will go (see
"Description of the navigation device" on page 11).
My navigation device makes no response any longer, the screen is frozen.
Perform a reset.
1. Press the (On/Off) key and keep it pressed until the device
switches off (approx. 5 seconds).
2. Wait several seconds.
3. Press the (On/Off) key and keep it pressed until the device
switches on.
Your settings and your saved destinations and routes will be retained.
It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In the N
AVIGATION window tap on Options > Settings > General.
2. Set the values for Brightness day and Brightness night as low as
possible.