Filter
Top Products
User’s manual maps + more
Operating the navigation system - 27 -
Muting
The Muting symbol can indicate the following states:
No symbol: The navigation application is not muted.
Muting: The navigation application is muted. If the device is navigating
at the moment, you will not hear any driving instructions.
Note: This symbol indicates only the muted state of the navigation
instructions. It says nothing about the volume of the hands-free module.
The procedure for regulating the volume is described in the chapter
"Navigation in Vehicle mode", section "Volume", on page 69.
Logbook
The Logbook symbol can indicate the following states:
No symbol: The logbook is deactivated. There is no recording of trips.
Logbook: The logbook is activated. Before each navigation you will be
prompted to enter the necessary details for the logbook entry (reason
for the trip, km total, …). It is possible however to suppress the
recording of the trip.
For a description of the logbook refer to the chapter "Logbook" on
page 110.
Media
When the navigation device is mounted in the vehicle and is being
supplied with power from the vehicle, it can control the installed car
radio. The Media symbol then indicates which audio source is active at
the moment.
No symbol: The radio is off or the navigation device is not being
supplied with power from the vehicle.
FM: The current audio source is the radio. It is set to FM reception.
AM: The current audio source is the radio. It is set to AM reception.
DAB (white): The current audio source is the radio. It is set to DAB
reception.
DAB (red): The current audio source is the radio. It is set to DAB
reception. This symbol will appear if no DAB reception is possible and
reception of the selected station via FM is likewise impossible.
AUX-IN audio: The current audio source is an external device which is
connected to the AUX port of the car radio.