Filter
Top Products
User’s manual maps + more
- 100 - Useful functions
Note: If there is only a sparse network of charging stations in the region
in which you are travelling, it may be impossible to calculate a Multi-
Stop route.
If you have entered a complete address or a POI as destination, you
can also define whether your vehicle can be charged there. For more
details refer to the chapter "Private charging stations" on page 101.
Traffic information
If a new traffic message concerning the Multi-Stop route arises while
navigation is in progress, the Traffic information button will appear at
the right edge of the screen. This traffic message will be treated in
automatic mode (see "Preview TMC" in the section "Recalculate route:
Automatically" on page 106).
10.16.2 Driving range warning
Note: This function is available only when:
► GPS reception is good enough for positioning purposes
► the navigation device is correctly inserted in its cradle.
► the vehicle ignition is on.
► range warning was activated in the settings.
The system continuously calculates the current range and warns if there
will be only a small driving range remaining when you arrive at the
destination, at the next interim destination or at the next charging
station.
Note: The remaining driving range can be viewed at any time in the
TRIP COMPUTER window.
► In the START window tap on Car info > Trip computer (see also "Trip
computer" on page 111).
Activating the range warning
1. In the NAVIGATION window tap on Options > Settings > Navigation.
2. Set the Driving range warning setting to Yes.
Range warning during navigation
You will be warned if one of the following cases arises:
► There is only one more charging station or the home address within
range
► The next charging station and the home address are out of range