Filter
Top Products
JKSSS+ Series - 75
JKSSS+ Series 2.3 - 4.2KV
HOTTEST STATOR
RTD#: # @ ### C
HOTTEST NON-STATOR
RTD#: # @ ### C
STATOR PHASE C1
RTD #5: ### C = ### F
STATOR PHASE C2
RTD #6: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #5: ### C
MAX TEMP SINCE
CLEAR RTD #6: ### C
END BEARING
RTD #7: ### C = ### F
SHAFT BEARING
RTD #8: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #7: ### C
MAX TEMP SINCE
CLEAR RTD #8: ### C
RTD #9
RTD #9: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #9: ### C
STATOR PHASE A1
RTD #1: ### C = ### F
STATOR PHASE A2
RTD #2: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #1: ### C
MAX TEMP SINCE
CLEAR RTD #2: ### C
STATOR PHASE B1
RTD #3: ### C = ### F
STATOR PHASE B2
RTD #4: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #3: ### C
MAX TEMP SINCE
CLEAR RTD #4: ### C
MENU
METERING PAGE 3
RTD VALUES
Screen 1
Screen 2
Screen 3
Screen 4
Screen 5
Screen 6
Screen 7
Screen 8
Screen 9
Screen 10
Screen 11
Screen 12
Screen 13
Screen 14
Screen 15
Screen 16
Screen 17
Screen 18
Screen 19
Screen 20
Screen 21
Screen 22
Screen 23
Screen 24
Screen 25
Screen 27
Screen 28
Screen 29
Screen 26
PRESS ENTER TO
CLEAR MAX TEMP REGS
MEASURED RUN COOL
TIME: ### MIN
MEASURED STOPPED
COOL TIME: ### MIN
RTD #10
RTD #10: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #10: ### C
RTD #11
RTD #11: ### C = ### F
RTD #12
RTD #12: ### C = ### F
MAX TEMP SINCE
CLEAR RTD #11: ### C
MAX TEMP SINCE
CLEAR RTD #12: ### C
MP.3RTDValues(MeteringPage3)
Displays the RTD information.
Displays the hottest stator RTD (#1 - 6
depending upon number of RTDs used for
stator).
Displays the hottest non-stator RTD (#7-12 if
#1-6 is used for stator).
Displays the temperature of stator phase A1
in °C and °F.
Displays the maximum temperature for
RTD #1 since the last command to clear the
thermal register.
Same as Screens 3 - 4 for RTDs #2-12.
Allows the user to clear the maximum
temperature register upon entering the
setpoint level 3 password.
Displays the measured run cool time in
minutes.
Displays the measured stopped cool time in
minutes.