Filter
Top Products
JKSSS+ Series - 73
JKSSS+ Series 2.3 - 4.2KV
MP.1MeteringData(MeteringPage1)
Displays the basic current metering data:
Phase A, B, C and ground fault (option)
current.
Displays the average current, percent of
imbalance and the motor’s RPM (available
with tachometer input)
Displays the motor load in percent of motor
FLA.
Displays the line frequency and the present
Phase Order.
Displays the percent of the remaining thermal
register. In order for the motor to successfully
start, the percentage must be greater than
the thermal capacity required for a successful
start.
Displays the thermal capacity required to
successfully start the motor.
Displays the average time required to start.
Displays the average current during start.
Displays the measured I
2
T required to start
the motor.
Displays the amount of time required to start
the motor during the last successful start.
MENU
METERING PAGE 1
CURRENT METERED DATA
IC: ###### G/F: #####
I (AVG): ####
I/B: ## % RPM: ####
MOTOR LOAD % OF FLA
FLA: ### %
LINE FREQUENCY:: ##.##
PHASE ORDER: ###
THERMAL REGISTER
REMAINING: ### %
THERMAL CAPACITY
TO START: ### %
AVERAGE START TIME
TIME: ##.# SECS
AVG START CURENT
: ###### AMPS
I*I*T TO START
I*I*T: #######
LAST START
TIME: ##.# SEC
IA: ###### IB: ######
Screen 1
Screen 2
Screen 3
Screen 4
Screen 5
Screen 6
Screen 7
Screen 8
Screen 9
Screen 10