Filter
Top Products
JKSSS+ Series - 97
JKSSS+ Series 2.3 - 4.2KV
In order to ensure continued reliable and safe operation of the equipment, a
program of periodic maintenance must be established. Operating and environmental
conditions will usually dictate the frequency of inspection required. NFPA Publication
70B “Electrical Equipment Maintenance” may be used as a guide for setting up the
maintenance program.
Refer to the SAFETY section of this manual for important
information.
Keep a permanent record of all maintenance work. At a minimum, this record should
include information on:
1) Items inspected
2) Reports of any testing
3) Equipment condition
4) Corrective actions or adjustments
5) Date of work
6) Comments
The degree of detail of the record will depend somewhat on the operating
conditions.
For your safety, turn off and lock out main and control circuit power before servicing
the starter. Certain minimum safety procedures must be followed:
1) Only should attempt this service.
perform service on or next to exposed components energized with line
voltage.