Filter
Top Products
11.28
Assembling pistons and conrods
L Note:
[LT] Modified conrod length and pistons from 1993
model year on
•
Comply with conrod weight tolerances.
Weight tolerance .............................................± 4 g
•
Assemble piston and conrod.
L Note:
The oil bore in the conrod eye is on top in the in-
stalled position. The arrow marking on the piston
crown must point in the forward-travel direction.
•
Install only pistons of the same make and the
same weight category.
e Caution:
Renew the piston pin circlip each time it is removed.
Removing and installing crankshaft
pinion and rotor flange
X Tightening torque:
Machine screw............................................. 50 Nm
1
2
LT110410