Filter
Top Products
23.17
Disassembling and assembling output
shaft
•
Before disassembling, measure axial clearance
of spur gear for 1st, 2nd and 5th gears.
1st gear .... 0.10...0.30 mm (0.003937...0.01181in)
2nd gear ... 0.20...0.60 mm (0.007874...0.02362in)
5th gear .... 0.20...0.40 mm (0.007874...0.01575in)
•
Set axial clearance with spacer shim rings.
•
As part of the overall dimension, the spacer ring
is fitted between the spur gear for 1st and 4th
gear.
Removing ball bearing
•
Clamp output shaft in vice with jaw guards.
•
Remove ball bearing with universal puller,
BMWNo.007500.
LT230210
4.
5.
3.
1. Gang
2.
125.8
-0.1
00 7 500
LT230220