Filter
Top Products
34.25
Removing and installing rear ABS
sensor
•
Remove brake caliper but do not loosen brake
line.
•
Release sensor with socket wrench,
BMW No. 00 2 640.
•
Disconnect plug connection (1) for sensor line.
•
Install in the reverse order of removal.
e Caution:
Check sensor spacing where the gap is greatest; if
necessary, adjust with spacer plates (3).
Carefully lay sensor line.
Sensor gap
Up to 1996 model year..................0.60 ... 0,65 mm
................................................(0.0236...0.0256 in)
From 1997 model year on ............0.45 ... 0.55 mm
................................................(0.0177...0.0216 in)
X Tightening torque:
Sensor .......................................................... 4 Nm
LT340160
2
1