34.28
Disassembling rear master brake cyl-
inder
e Caution:
Piston is under spring loading.
•
Using thrust piece (1), push piston (2) a little way
inwards.
•
Press out stop screw (3).
•
Pull out piston with spring (4).
•
Loosen spring from ring groove.
•
Check piston and sealing rings (5) for damage.
•
Install in the reverse order of removal.
L Note:
Lightly coat sealing rings with brake fluid before in
stalling.
LT340200
1
4
5
2
3