Filter
Top Products
21.10
•
Release lower retaining bolt (1) of the ignition coil
mounting.
•
Secure centring fixture (2), BMW No. 21 2 670,
to intermediate flange.
•
Centre driving disc with corresponding centring
pin (3).
•
Evenly tighten retaining bolts (4) crosswise.
•
Remove centring fixture.
X Tightening torque:
Housing cover
.............................................. 19 Nm
•
Screw guide pin, BMWNo.231820, in fitted
sleeve of intermediate flange.
L Note:
Install the short guide pin on the left-hand side.
•
Install complete drive train.
LT210020
1
4
3
21 2 670
2