32.10
Removing and installing accelera-
tor cable
•
Remove fuel tank.
•
Remove cable cover (1) on handlebar fitting.
•
Detach cable.
•
Turn in cam disc on throttle stub pipe (2) and de-
tach cable.
•
Install in the reverse order of removal.
L Note:
When installing, first attach cable at cam disc. Fit ca-
ble without kinks.
•
Adjust cable play at adjusting screw (3).
Accelerator cable play:
Desired value.......................... 0.75 mm (0.0295 in)
LT320080
1
3
2