Filter
Top Products
COMAND introduction
80
Function
7 , Volume control (Y page 88)
8 F Mute button (Y page 88)
Example:
X
Switching directly to Radio or CD
menu: Press M once or twice.
COMAND display
In the COMAND display, you will find the
function currently selected and the
corresponding menus. The COMAND display
is divided into several areas.
1
Status line
2
Main functions
3
Main area
4
Submenus
5
Climate control settings
A white bar under main functions 2 indicates
the active area.
Once you have selected a main function 2,
main area 3 is active.
i
The layout of the menus may vary
depending on your vehicle’s equipment.
This manual shows the menus for a fully
equipped vehicle.
Instrument cluster multifunction
display
This section describes features and controls
via the COMAND controller, display and
shortcut buttons only.
Please refer to the “Instrument cluster
control system” section of this manual
(Y page 231) for function descriptions and
operation of the instrument cluster
multifunction display and multifunction
steering wheel buttons as they relate to
COMAND features described in this section.
Adjusting COMAND display illumination
1
Knob
X
Brightening illumination: Turn knob 1
clockwise.
X
Dimming illumination: Turn knob 1
counterclockwise.
Control systems