Filter
Top Products
COMAND telephone
160
1
Data field
2
Input mark (cursor)
3
Input characters
X
If you want to change the available
characters: Proceed as described in the
“Changing data field” paragraph in the
“Assigning a New Entry in the Address
Book” section (Y page 167).
Adding to an existing entry in the
COMAND address book
X
Slide omp or rotate ymz and select list
entry (Y page 158).
X
Select Options £ Save £ Add.
i
Save does not function if the selected list
entry is already saved in the COMAND
address book.
X
Select a number category to add, e. g.
Home.
X
Select a telephone category to add, e. g.
Land Line.
X
Select Save.
The search menu for COMAND address
book entries appears.
X
Search for desired entry.
i
There is a detailed description of
searching for an COMAND address book
entry in the “Searching for an address book
entry” section (Y page 172).
X
Press n when you have finished searching.
COMAND saves the data if there are fewer
than four numbers assigned to the entry
you are searching for in the selected
number category.
If four numbers are saved for the entry you
are searching for, a prompt will appear
asking whether you want to overwrite one
of the existing numbers.
X
Select Yes or No.
If you select Yes, a selection list will appear
containing the four existing numbers.
X
Select the number to be overwritten.
COMAND overwrites the selected number
with the new data.
Incoming call
Rejecting or accepting the call
X
Rejecting: Select Reject.
or
X
Press t on the telephone keypad or on
the multifunction steering wheel.
i
If you have a CDMA/TDMA mobile phone
and reject a call, only the ring tone will stop.
The call itself can only be ended by the
caller.
X
Accepting: Select Accept.
or
X
Press s on the telephone keypad or on
the multifunction steering wheel.
or
X
Press 0 on the multifunction steering
wheel.
Control systems