Filter
Top Products
Instrument cluster control system
246
G
Warning!
Malfunction and warning messages are
only indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner’s and/or driver’s
responsibility to maintain the vehicle’s
operating safety. Have all required
maintenance and safety checks performed
on the vehicle. Bring the vehicle to an
authorized Mercedes-Benz Center to
address the malfunction and warning
messages.
X
Press ( or & to select the Service
menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display: 2 Messages.
X
Press % or $ to select the
Messages function.
X
Press # to confirm.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (Y page 475).
X
Use % or $ to scroll through the
messages.
If you turn the SmartKey in the starter switch
to position 0 and then back to position 2, all
messages will be deleted from the message
memory.
Settings menu
In the Settings menu the following functions
are available:
R
Setting daytime running lamp mode (USA
only) (Y page 246)
R
Showing or hiding additional speedometer
(Y page 247)
R
Selecting speedometer display mode
(Y page 247)
R
Switching the radar sensors on or off
(Y page 247)
Setting daytime running lamp mode
(USA only)
X
Press ( or & to select the
Settings menu.
X
Press % or $ to select the Day
Running Lamps function.
X
Press #.
X
Press # again if you would like to
change the current status.
Depending on the previous status, the
daytime running lamps will be switched on
or off.
With Daytime Running Lamps mode
Enabled selected and the exterior lamp
switch at position M or *, the low-
beam headlamps are switched on when the
engine is running.
In low ambient light conditions the following
lamps will come on additionally:
R
Parking lamps
R
Tail lamps
R
License plate lamps
R
Side marker lamps
For more information on the daytime running
lamp mode, see “Lighting” (Y page 318).
Control systems