Filter
Top Products
Occupant safety
63
Position shoulder belt across chest and
shoulder, not face or neck.
A booster seat may be necessary to achieve
proper seat belt positioning for children
over 41 lb (18 kg) until they reach a height
where a lap/shoulder belt fits properly
without a booster.
Install child seat according to
manufacturer’s instructions.
The child seat must be firmly attached to
the right and left side anchors.
An incorrectly mounted child seat may
come loose during an accident which could
result in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat mounting fittings must be
replaced.
Non-LATCH-type child seats may also be used
and can be installed using the vehicle’s seat
belt system. Install child seat according to the
manufacturer’s instructions.
The LATCH-type anchors are covered with
upholstery blends.
1
Indicates the position of the anchors
2
Anchors
3
Upholstery blend
4
Installation device
X
Fold upholstery blend 3 upward to access
anchors 2.
X
Turn installation device 4 to a vertical
position so that upholstery blend 3 does
not fold down.
X
Install a LATCH-type child seat according
to the manufacturer’s instructions.
A rigid connection between the child seat
and the body of the vehicle is established.
Child safety
Override switch
G
Observe Safety notes, see
page 59.
With the override switch you can disable the
rear side window switches in the rear trim
panels.
G
Warning!
Activate the override switch when children
are riding in the back seats of the vehicle.
The children may otherwise injure
themselves, e.g. by becoming trapped in
the window opening.
1
Override switch
2
Indicator lamp
Safety and security
Z