Filter
Top Products
Instrument cluster control system
231
X
Slide qmr or rotate ymz until desired
setting is reached.
X
Saving setting: Press n.
Pulse mode
X
Select seat (Y page 227).
X
Selecting Pulse Mode: Slide omp or
rotate ymz.
X
Confirming selection: Press n.
A list appears. You can choose between
different types of massage:
The current setting is indicated by a solid circle.
X
Slide qmr or rotate ymz until desired
setting is reached.
X
Saving setting: Press n.
i
Depending on the setting, the massage
function runs for about 7 to 10 minutes.
Instrument cluster control system
Introduction
The control system is activated as soon as the
starter switch is in position 2 (Y page 301).
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to call up statistical
data on your vehicle, and much more.
G
Warning!
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the
multifunction steering wheel should only be
done by the driver when traffic and road
conditions permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
The control system relays information to the
multifunction display.
Control systems
Z