Filter
Top Products
Voice Control radio
268
The Voice Control System tunes the
radio to frequency FM 95.5.
“Save station” (List saved stations)
Use this command to save the set station (AM
and FM only) by name in your personal station
list. After using this command, the Voice
Control System will prompt you to repeat the
name two to four times before it is saved in
the station list. When repeating the station
name, make sure that you pronounce it in the
same manner as during the first input.
Otherwise the name cannot be saved and the
Voice Control System cancels the save
procedure.
i
The Voice Control System may recognize
names even if not saved in your voice. For
optimum performance, however, call up
only names you have saved yourself.
i
You can freely select the station name, for
example “Favorite station”.
Sample dialog:
s
Save station
t
Please say the station name
s
Smooth Jazz
t
Please say the station name again
s
Smooth Jazz
t
The station Smooth Jazz has been
saved
“Select station” (List saved stations)
Use the command “Select station” (AM and
FM only) to select a saved station name from
your station list.
Sample dialog:
s
Select station
t
Please say the station name
s
Smooth Jazz
The Voice Control System tunes to the
corresponding frequency.
“Station Smooth Jazz” (List saved
stations)
Use this command (AM and FM only) to
directly select a saved station name from your
station list.
Sample dialog:
s
Station Smooth Jazz
The Voice Control System tunes to the
corresponding station.
i
If the Voice Control System does not
recognize the station name you requested,
please refer to the section “List station
list”. By following the dialog, you can check
and determine if the name is saved in the
station list.
“List station list” and select station
from list
Use this command to list the entire station
list, or to select an entry from the station list.
Sample dialog:
s
List station list
The Voice Control System reads out the entire
list.
To select a station:
X
Press !, when the system reads the
desired station.
X
Canceling the dialog: Press L.
The dialog is concluded. The system
confirms “Cancel”.
“Delete station” (List saved stations)
Use the command “Delete station” (AM and
FM only) to delete a station from your
personal station list.
Control systems