Filter
Top Products
70 96/96C Owner’s Manual
MaIn paGeS >
Set CDI Scale—(Aviation and Marine Modes)
Adjusts the CDI scale.
Set Bug Indicator—(Aviation and Marine Modes)
Sets the Bug Indicator mode.
Enable/Disable VNAV Indicator—(Aviation Mode)
Bearing Pointer/Course Pointer—(Marine Mode)
Toggles between the Bearing Pointer and the Course
Pointer. The Course Pointer, which shows how far off
you are from your course and how to get on course.
Also referred to as a CDI, Course Deviation Indicator.
Set Up VNAV—(Aviation Mode) takes you to the
VNAV setup page.
Set Up Page Layout—allows you to choose text size
and number of data elds.
Change Data Fields—allows you to specify the type
of data shown in each data eld on the page. Refer to
the Appendix for data descriptions.
Active Route Page
Whenever you have started a route while in Aviation
or Marine Mode, the Active Route Page shows each
point (waypoint or map item) of the active route, with
the point name, Course, Distance, and several other
elds of information. The current destination point,
the “active” point, is marked with an arrow icon. As
you navigate a route, the list automatically updates to
indicate the next “active” point rst. The Active Route
and Route Review Pages share many of the same
features and options.
Whenever you have started a route in the GPSMAP
96/96C set in Automotive Mode, the Active Route
Page shows each turn of the active route, with the
distance to the turn, the street name, and estimated
time to arrival and time of arrival. As you navigate a
route, the turn list automatically updates to indicate
the next turn at the top of the list.