Filter
Top Products
106 96/96C Owner’s Manual
MaIn Menu >
If Scan is selected, the GPSMAP 96/96C
automatically directs the beacon receiver to
scan for available beacon transmitters.
If User is selected, select the Freq, and Bit
Rate elds, and enter the appropriate settings.
The beacon status, signal-to-noise ratio and
distance to beacon are shown in the bottom of
the page.
Tones Setup
The Tones Setup Page allows you to customize the
signal tones for a variety of unit features.
Tones Setup Page
To use the Tones Setup feature:
1. Access the Tones Setup Page.
2. Use the ROCKER to highlight the feature
for which you want to set a tone, and press
ENTER to show the options menu.
3. Highlight a option, and press ENTER. As
you move down the list, each different tone
sounds.
Page Sequence Setup
The Page Sequence Setup Page allows you to reorder
any of the Main Pages, or add pages when you press
PAGE. If you add a page to the sequence, it no longer
appears in the Main Menu.
Page Sequence Setup Page