Filter
Top Products
96/96C Owner’s Manual 9
BaSIc operatIon >
The following features are referred to throughout this
manual.
Cursor—the highlighted area on the screen that can
be moved up/down/left/right with the ROCKER to
select individual elds. Moving the cursor makes a
selection, begins data entry, or scrolls through a list.
Field—the location on a page where data or an option
can be entered and shown. The cursor is placed on
a eld using the ROCKER to begin data entry or
selection of options.
On-Screen Button—use the ROCKER to highlight a
button and press Enter to select the action.
Scroll Bar—when viewing a list of items too long to
shown on the screen, a scroll bar appears along the
right side of the list. The position of the scroll bar
indicates which portion of the list is currently shown.
The height of the scroll bar indicates the number of
items in the list. To scroll through a list, press up or
down on the ROCKER.
Default—a factory set system format is followed
unless you change a setting. For example, the
default setting for speed readings in Marine Mode is
nautical miles per hour (knots), but may be changed
to kilometers or miles per hour. Once a setting is
changed, the new setting is retained until another
change is made or a Restore Default option is
selected.
On-Screen Operating Features
Options Menu
with Scroll Bar
Default Settings
Option