Filter
Top Products
18 96/96C Owner’s Manual
BaSIc operatIon >
Select Approach
The Select Approach option replaces a destination
airport with the sequence of waypoints for the
selected approach. Keep in mind that the airport must
have a published approach (GPS, RNAV, VOR, NDB,
localizer, or ILS) and only the nal course segment
(from nal approach x to missed approach point) of
the published approach is available in the
GPSMAP 96/96C.
Approach
Identier
NOTE: When using a route, and on the nal leg
of the route to the destination airport, the Select
Approach option allows you to quickly retrieve
and select available approaches. This option
overrides your current route. The original route
is still available for later use. The approaches
provided in the Jeppesen database are for
monitoring purposes only. The GPSMAP 96/96C
is not an IFR-approved instrument and should
not be used as a primary source of navigation
guidance in instrument conditions.
To select an approach using the Go To
page:
1. Press DIRECT TO
D
to show the Go To
Page.
2. Use the ROCKER to highlight Approach.
3. Use the ROCKER to select the approach from
the third eld, and press ENTER.
4. Use the ROCKER to select Vectors or FAF,
and press ENTER. The GPSMAP 96/96C
removes the destination airport from the Go To
and replaces it with the approach waypoints.