Filter
Top Products
66 96/96C Owner’s Manual
MaIn paGeS >
To measure the Bearing/Distance between
two points:
1. Highlight the Measure Distance, and press
ENTER. An on-screen pointer appears on the
map screen at your present position with ENT
REF below it.
Measure Distance
2. Move the cursor to a reference point (the
starting point that you want to measure from),
and press ENTER. A push-pin icon marks the
starting point on the map screen.
3. Move the cursor to the point to which you want
to measure. The bearing and distance from
the reference point and cursor coordinates
are shown in the data window at the top of the
screen.
4. Press QUIT to nish.
To set up the page layout:
1. Highlight Set Up Page Layout from the
Options Menu, and press ENTER.
2. Select an option, and press ENTER. The
options vary between the three usage modes.
To change a data elds:
1. From the Options Menu, highlight Change
Data Fields, and press ENTER.
2. Move the eld highlight to the data eld you
want to change, and press ENTER.
3. Press up or down on the ROCKER to highlight
the data you want to show, and press ENTER.
4. Press QUIT to exit.
Refer to the Appendix for a detailed description of
each data option.