Garmin 96 GPS Receiver User Manual


 
130 96/96C Owner’s Manual
appendIx >
Messages
Accuracy Alarm—the GPS accuracy has fallen outside of
user-set value.
Alarm Clock—the alarm clock has sounded.
Antenna Shorted to Ground—the external GPS antenna has
an electrical connection problem. Contact Garmin Product
Support.
Approaching Target Altitude—within 1,000 feet of nal
VNAV target altitude.
Approaching Turn—you are nearing a turn in a route.
Approaching VNAV Prole—you are within one minute of
reaching the initial VNAV decent point.
Arriving at Destination—you are nearing your destination.
Batteries Low—the batteries needs to be replaced.
Basemap Failed Unit Needs Repair—there is an internal
problem with your unit. Contact Garmin Product Support to
have the unit serviced.
Can’t Unlock Maps—no applicable unlock code for one or
more maps was found. All MapSource maps are not accessible.
Database Error—internal problem with the unit. Contact
your dealer or Garmin Product Support to have the unit
repaired.
Detail Maps Don’t Support Routing—maps that are loaded
on the data card do not support automatic route calculation.
Dragging Anchor—the distance set in the Anchor Drag Alarm
is exceeded.
Drift Alarm—the water depth has changed by the amount
entered in the Drift Alarm setup.
Lost Satellite Reception—the unit is unable to receive
satellite signals.
Memory Full—unit memory is full, no further data can be
saved.
Memory (RAM) Failed Unit Needs Repair—there is an
internal problem with your unit. Contact Garmin Product
Support to have the unit serviced.
Memory (ROM) Failed Unit Needs Repair—there is an
internal problem with your unit. Contact Garmin Product
Support to have the unit serviced.
Near Proximity Point—you have reached the distance set for
a proximity waypoint.
No Diff GPS Location—RTCM is selected but the unit is not
receiving DGPS data.
No Roads Near Destination—the destination for the road
route you tried to calculate is not near any roads. Select a
different destination.
No Roads Near Starting Point—the start location for the
road route you tried to calculate is not near any roads. Select a
different start location.