Filter
Top Products
96/96C Owner’s Manual 131
appendIx >
No DGPS Position—no differential connection data is
available, or not enough data is available to calculate a DGPS
position.
No Tide Stations for that Area—no tide stations within 100
miles of the area.
None Found—no data matched the search criteria.
Off Course—you are off course by the distance set in the Off
Course Alarm.
Proximity Memory Full—no additional proximity waypoints
can be saved.
Proximity Radius Overlaps—the radius of two proximity
waypoints overlap.
Route Already Exists—you have entered a route name that
already exists.
Route Calculation Error—no route can be calculated.
Route Memory Full—no additional routes can be saved.
Route Truncated—uploaded route from another device has
more than 250 waypoints.
Route Waypoint Memory Full—no additional route
waypoints can be saved.
Steep Turn—approaching a turn that requires a bank angle in
excess of 25 degrees to stay on course.
Sunrise, Switching to Day Mode—the unit is switching to
Day Mode.
Sunset, Switching to Night Mode—the unit is switching to
Night Mode
Track Already Exists—a saved track with the same name
already exists.
Track Log Full—the track log is full and track recording was
turned off. To record more track points, you need to clear the
track log and turn track recording on.
Track Memory Full—no more track data can be stored.
Delete the old track data to store the new data.
Track Truncated—a complete uploaded track will not t in
memory. The oldest track log points have been deleted.
Transfer Complete—data transfer was completed.
USB Connected—the USB cable was recently plugged in.
User Timer Expired—the Timer Alarm value has counted
down to zero.
VNAV Cancelled—VNAV function has been cancelled due to
a change in the active route.
Waypoint Already Exists—a waypoint with the same name
already exists.
Waypoint Memory Full—the unit has stored the maximum
number of waypoints.