Filter
Top Products
110 96/96C Owner’s Manual
MaIn Menu >
Units Setup
The Units Setup Page allows you to select the units of
measurement for your GPSMAP 96/96C.
To use the Units Setup feature:
1. Access the Units Setup Page.
2. Use the ROCKER and ENTER keys to
highlight the various units elds, and select a
unit from the lists.
Location Setup
The Location Setup Page allows you to dene settings
for Position Format, Map Datum, Heading, and
Magnetic Variation. To open the Location tab, press
MENU twice to open the Main Menu. Select Setup
from the vertical tab list. Then select Location from
the row of tabs along the top of the page.
Refer to the Appendix of this guide for more
information about location formats and map datum.
Also visit the National Imagery and Mapping Agency
at http://www.nima.mil, for more information on grids
and datum.
Position Format—changes the coordinate system in
which a given position reading is shown. You should
only change the position format if you are using a
map or chart that species a different position format
or wish to use a format you are familiar with. The
default format is latitude and longitude in degrees,
minutes, and thousandths of a minute (hddd°mm.
mmm). For additional information on Loran TD setup,
see the Appendix.