Filter
Top Products
96/96C Owner’s Manual 45
BaSIc operatIon >
4. A list of tide stations nearest to you appears. If
a “None Found” message appears, then you
are not currently located near a coast line.
Press MENU to show the Tide Station Options
Menu. Select from Nearest Containing or
Change Reference. You can enter a key word
for a known tide station or can use the map
pointer to move to the nearest coast line, and
then press ENTER to establish a location near
marine items.
5. Select a tide station from the list, and press
ENTER to show the information page for that
tide station.
At the bottom of the Information Page are on-screen
buttons for Go To, Map, and Save.
To nd a Wreck or Obstruction:
1. Select the Marine Points icon, and then
press ENTER to show the sub-icon(s) for
marine items supported by the basemap, and
downloaded detailed marine charts.
Wrecks/Obstructions
2. Use the ROCKER to highlight and select the
Wrecks/Obstructions icon, then press ENTER.
3. If you get a “None Found” message, you are
too far from the coastline or out of the area of
map data coverage. Press MENU and use the
Change Reference option as explained on the
previous page.
4. Select an item from the list, and press ENTER
to show the information page for that item.