Filter
Top Products
96/96C Owner’s Manual 127
appendIx >
To set up Loran TD from the Setup Menu:
1. Press MENU twice to show the Main Menu,
then press again to show the Setup Menu.
2. Use the ROCKER to highlight the Location
icon and press ENTER to show the Location
Setup Page.
2. Highlight the “Position Format” eld, and press
ENTER to show the format list.
3. Highlight “Loran TD” press ENTER to show the
Loran Setup Page.
4. To change the settings of any of the ve elds,
highlight the eld, press ENTER select or enter
the setting, then press ENTER.
6. When nished, highlight Save, and press
ENTER.
Loran TD Setup Page
If the active GRI Chain, secondary stations, or offsets
have been changed since the waypoint was created,
the waypoint now references the active GRI-chain
and secondary stations and adjust the TD coordinates
accordingly. Remember that the GPSMAP 96/96C
is not relying on the LORAN signal for navigation
and actually converts the TD coordinate to a useful
LAT/LON coordinate before storing the waypoint to
memory or using it for navigation. Because of this,
the unit can navigate to a TD coordinate anywhere in
the world.