Filter
Top Products
96/96C Owner’s Manual 57
BaSIc operatIon >
Settings
Target Altitude—the altitude you want to be at
when you reach your target location. Select Above
Waypoint to use eld elevation for airports in the
Jeppesen database or “Above MSL” to specify an
exact MSL altitude target.
By—denes the target location with settings of
distance Before or After a reference waypoint
(normally the nal destination airport). To set a target
location AT a reference waypoint, enter a distance of
zero.
VNAV Waypoint—allows you to select any waypoint
along the currently active route (or Go To) as your
reference waypoint. The reference waypoint denes
the target location.
VNAV Prole—allows you to select the descent rate.
VNAV Messages—enables and disables the VNAV
alert messages.
VNAV Setup Page
To dene the VNAV prole settings:
1. Press MENU twice to show the Main Menu.
Use the ROCKER to select Setup, and then
VNAV.
2. Use the ROCKER and ENTER keys to
highlight and select options.
To Restore Defaults:
While on the VNAV Page, press MENU. A
message “Restore Defaults” appears. Press
ENTER.