Filter
Top Products
96/96C Owner’s Manual 61
MaIn paGeS >
To move the arrow:
Press up, down, right or left on the ROCKER.
As you move the Arrow, the distance and bearing
from your present position to the cursor shown in the
data window. When you zoom in panning mode, the
arrow stays centered on the screen. When the arrow is
stationary, a xed coordinate position appears in the
position eld, and the distance and bearing from your
present position changes as your vehicle moves.
To re-center your position on screen:
1. When you are nished panning the Map, press
QUIT.
2. The unit automatically returns to position
mode.
The arrow can also be used to snap to on-screen
waypoints and map items, allowing you to review
a selected position or feature directly from the map
screen.
To select an on-screen waypoint or map
item with the arrow:
1. Use the ROCKER to move the arrow to a
waypoint or map item. If there are several
items grouped closely together, zoom in closer.
2. When a waypoint or map item is selected,
it is highlighted on screen with the name
and position shown at the top of the screen,
along with the distance and bearing from your
current location.
Map Page in Panning
Mode with a map item
highlighted.