Filter
Top Products
96/96C Owner’s Manual 105
MaIn Menu >
Text Out—allows ASCII text output of location and
velocity information. No input.
RTCM In—provides DGPS input using a standard
RTCM SC-104 format. No output.
Interface Setup—RTCM In/NMEA Out
RTCM In/NMEA Out—allows DGPS input using a
standard RTCM SC-104 format and supports the output of
standard NMEA 0183 version 3.01 data.
RTCM In/Text Out—allows DGPS input using a standard
RTCM SC-104 format and supports the output of simple
ASCII text output of location and velocity information
None—provides no interfacing capabilities.
NOTE: When the USB cable is connected
to the GPSMAP 96/96C, it is automatically
detected and communicates only in Garmin
Format. When the USB is connected, Garmin
format does not communicate through the Serial
connection, while all other formats can be used
by the Serial connection with the USB still
connected.
To change an Interface Setup feature:
1. Access the Interface Setup Page as explained
at the beginning of this section.
2. Highlight a setting, and press ENTER.
3. When you select Text Out and /or RTCM In,
additional elds appear. Use the ROCKER to
highlight Baud Rate, and press ENTER. Use
the ROCKER to highlight a setting, and press
ENTER.
4. For Garmin DGPS or RTCM In/NMEA Out, use
the ROCKER to highlight Beacon, and press
ENTER. Use the ROCKER to select Scan or
User, and press ENTER.