Filter
Top Products
100 96/96C Owner’s Manual
MaIn Menu >
4. Use the ROCKER enter information for the
cruising and maximum speeds for your aircraft,
the your aircraft’s fuel ow, and the symbol for
your aircraft.
To select a saved aircraft prole:
1. On the Aircraft Prole Page, use the ROCKER
to highlight the Current Aircraft eld, and
press ENTER.
2. Use the ROCKER to select an aircraft prole
and press ENTER.
To create a new prole, rename or delete a
saved aircraft prole:
1. Use the ROCKER to highlight the New, Edit,
or Delete buttons at the bottom of the page,
and press ENTER.
2. Use the ROCKER to select the on-screen
RENAME or DELETE button, and press
ENTER. If Rename is selected, use the
ROCKER and ENTER to enter a new tail
number.
Weight & Balance
Weight & Balance can be used during your pre-
flight preparations to verify the weight and balance
conditions for your aircraft. By entering the weight
and arm values on this page, the GPSMAP 96/96C
can calculate the total weight, moment and center of
gravity (CG) gures, ensuring a safe flight every time.
Before entering the various gures, you need to
determine the basic empty weight of the airplane
and the arm (or station) for each weight entered.
These gures should be determined using the pilot’s
operating handbook for your airplane. The pilot’s
operating handbook also notes the weight limitations
and fore/aft CG limits. Compare those gures to the
values calculated by the GPSMAP 96/96C.