Raymarine hsb2 PLUS Series GPS Receiver User Manual


 
2-18 hsb
2
PLUS Series LCD Display
Hiding the Ships
Heading Marker
(SHM)
You use the context sensitive cursor to select and move the center of the radar
picture (the label CTR is displayed). See Moving and deleting items with the
context-sensitive cursor on page 1-17
Figure 2-8: Radar Display with an Offset Center
To return the center of the radar picture to the center of the screen, select the
center point (CTR ) then press the CLEAR key. Thecenter is always resetto the
center of the display when you turn on the Radar display.
Note: When the center is offset, additional range rings are displayed to the
edgeof the radarpicture, atthestandardring intervalfor thecurrentrange.If
you have selected the longest range scale, you cannot offset the center.
Hiding the Ships Heading Marker (SHM)
Theradarpictureincludesthe ship’s heading marker,whichisa linefromyour
vessel’s position to the edge of the picture at the vessel’s current heading. In
the standard Head Up mode, the heading marker is always a vertical line.
If you wish to check for small targets that may be hidden under the heading
marker, you canhide it momentarily using the context-sensitive cursor.
To hide the heading marker:
1. Position the cursor over the heading marker, so that the text SHM is dis-
played.
2. Press andhold CLEAR. The heading marker is hiddenuntil you release the
CLEAR key.
CTR
D3973-1
Offset centre
Bearing scale markers
adjusted to point
towards the offset
centre position
DEPTH
WPT
203°
T 1.20nm
01h:30m
14.4m
CTR
81186_3.book Page 18 Thursday, August 22, 2002 8:23 AM