Raymarine hsb2 PLUS Series GPS Receiver User Manual


 
Chapter 5: Standard Chart Operations 5-37
Transferring
Waypoints and
Routes
Toreceivethewaypointandroutelistsviahsb
2
,youmustset-upthetransferon
both display units - one unit will send waypoints, the other will receive them.
CAUTION:
Receiving waypoints from another
hsb
2
instrument overwrites any
existing waypoint and route lists.
1. Display the waypoint list as previously described, then press the WAY-
POINT TRANSFER soft key.
2. Pressthe softkey SEND WPT LIST ON HSB or RECIEIVE WPTS FROM HSB.You
are prompted to confirm:
Press NO to cancelthe operation, then ENTER ifyouwishtoclosetheway-
point list.
Press YES to continue. The waypoint list is transmitted to/from the chart-
plotter from/to another instrument on
hsb
2
.Whilethedataisbeingtrans-
ferred the soft key changes to STOP SENDING WAYPOINTS; when the
transfer is complete the soft key is re-displayed.
WAYPOINT
TRANSFER
81186_3.book Page 37 Thursday, August 22, 2002 8:23 AM