Filter
Top Products
5-32 hsb
2
PLUS Series LCD Display
Going To an
Individual Target
Point
Advancing to a Waypoint
➤ Once youare followinga route, you can advance to the nextwaypoint, even if
you have not reached the current target waypoint:
1. If necessary, press the GOTO default soft key to display the Goto/Follow
soft keys.
2. Pressthe WAYPOINT ADVANCE soft key.Thecurrentleg oftheroute isaban-
doned andthe next waypoint becomes the target. The display is updatedto
show the new route leg.
Restart Cross Track Error (XTE)
While you are following a route, or going to a target point, you can restart the
XTE. This sets the XTE to zero and moves the origin to the actual vessel
position.
Restarting XTE is useful if you find yourself off track and want to go straight
to your target, rather than get back onto the original track.
➤ To restart XTE:
1. Press the GOTO default soft key, the Follow/Goto soft keys are displayed.
2. PresstheRESTART XTE softkey. Therouteoriginmovestothecurrentvessel
position, thus the XTE becomes zero.
Going To an Individual Target Point
Rather than following a route, you can go directly to a selected target point,
this can be an existing waypoint (not in the current route), or the cursor
position.
➤ To navigate directly to an existing waypoint:
1. Usethetrackpadto positionthe cursoroverthe requiredwaypoint untilthe
letters WPT and the waypoint soft keys are displayed.
Alternatively, you canselect the waypointfrom the waypoint list as described
in Section 5.3.
GOTO
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
WAYPOINT
ADVANCE
GOTO
RESTART
XTE
WPT
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
81186_3.book Page 32 Thursday, August 22, 2002 8:23 AM