Filter
Top Products
Chapter 2: Getting Started & Adjusting the Display 2-13
Customizing the
Screen Presentation
Options
Customizing the Screen Presentation Options
TheSCREEN softkey letsyou switch thefollowing screenpresentationoptions
on or off:
Radar:
Chart:
Switching the Cursor Data Box On and Off
Thecursor data boxprovidesthecursor’sposition inlatitude/longitude and/or
bearing/range. If you wish to see a full image, you can switch the data box off.
➤ To control the cursor data box:
1. Press the SCREEN soft key.
2. Pressthe CRSR BOX softkey totogglethe settingfromOFF to ON orfromON
to OFF.
3. To return to the default soft key display, press ENTER.
➤ Youcan use thecontext sensitivecursorto selectandmovethe cursordatabox
(the label BOX is displayed). See Moving and deleting items with the context-
sensitive cursor on page 1-17
Switching Radar Range Rings or Chart Grid On and Off
The radar range rings can be turned on or off. They are normally left on, but
youmay wishto turnthem offifyou areusingVRM/EBLsor guardzones(see
Section 3.4 and Section 3.5) to make the display clearer.
The Chartplotter display includes grid lines of latitude and longitude which
you can use to help determine position on the chart. The grid lines can be
switched on if required.
If youare in Chart modethe RNGE RNGS soft keyis replaced bythe CHRT GRID
soft key.
➤ To turn the range rings or chart grid on or off:
1. Press the SCREEN default soft key.
2. Pressthe RANGE RINGS or the CHRT GRID soft keyto toggle the setting from
OFF to ON or from ON to OFF.
To return to the default soft key display, press ENTER.
D3643-2
SCREEN
CRSR BOX
OFF ON
RNGE RNGS
OFF ON
DATABOXES
OFF ON
WAYPOINT
OFF ON
D4177-1
CRSR BOX
OFF ON
CHRT GRID
OFF ON
DATABOXES
OFF ON
CUSTOM
OFF ON
SCREEN
CRSR BOX
OFF ON
BOX
SCREEN
RNGE RNGS
OFF ON
81186_3.book Page 13 Thursday, August 22, 2002 8:23 AM