Raymarine hsb2 PLUS Series GPS Receiver User Manual


 
Chapter 8: Installation 8-9
Mounting the Display
Unit
8.5 Mounting the Display Unit
The display unit is waterproof to CFR46 and can be installed either above or
below deck. The display unit can be mounted using the mounting bracket
supplied, or console mounted using the optional flush-mounting kit (see
Section 8.2).
Mounting Bracket
The display unit can be mounted on adash, chart table, bulkhead or deckhead.
Figure 8-4: LCD Display Mounting
1. Loosen the knobs and remove the mounting bracket from the display unit.
2. Markthe locations of the mounting bracket screw holes on the mounting
surface.
3. Usethe screwssupplied to attach the mountingbracket at themarked loca-
tions.
4. Attach the display unit to the mounting bracket, adjust the display angle
and tighten the knobs.
Console Mounting
The display unit can be console mounted if required, using the optional flush-
mounting kit (M92708).
81186_3.book Page 9 Thursday, August 22, 2002 8:23 AM