Raymarine hsb2 PLUS Series GPS Receiver User Manual


 
1-8 hsb
2
PLUS Series LCD Display
Operating Modes
Operating Modes
Half-Screen Window Options
Chart display, Radar display: If data is available as a function of the
combined display unit it can be displayed full screen, as shown in
Figure 1-2, or in a half-screen window.
CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint.
BDI:ThisgivestheBearingand DistanceIndicatorgraphicaldisplay,with
data relating to the target waypoint.
Nav Data: This shows ninedata boxes, providing navigational data in the
units specified in your set up. Note that up to 6 of these data boxes are also
available as a user-selectable group (see Section 7.3).
You select the operating mode and windows using the DISPLAY key as
described in Chapter 2.
Multi-display systems
If you have several hsb
2
series Radar and Chartplotter displays connected
operation is similar to acombined Pathfinder Radar/Chartplotter Unit: three
full-screen modes – radar, chart and data log are available on all displays.
In addition, if you have an hsb
2
series Fishfinder display connected, you can
setanydisplaytofishfindermode;ifthesystemincludesachartplotter,similar
functionality to a combined Fishfinder/Chartplotter is available on all
displays.
On an
hsb
2
system with Radar, Chart and Fishfinder available, the following
information can be shown on any display unit:
For details on the fishfinder, refer to the
hsb
2
Series Display Owner’s
Handbook supplied with your fishfinder.
Table 1-2: Window Options for Integrated Systems
Full-screen mode Half-screen Window Options
Chart Mode, CDI, BDI, Nav Data, Fishfinder or Radar
Radar Mode CDI, BDI, Chart or Nav Data
Fishfinder Mode Depth/temp, Chart or CDI, BDI
Data Log Mode Windows not available
81186_3.book Page 8 Thursday, August 22, 2002 8:23 AM