Raymarine hsb2 PLUS Series GPS Receiver User Manual


 
Chapter 7: Setting Up the System Defaults 7-7
Day/Night
Day/Night
This option allows you to change the display between day and night modes.
If you select NIGHT mode, a different palette, more suited to night time
viewing is used.
Help
When Help is set to ON, a prompt appears when selecting a soft key or menu
choice, and when using the context-sensitive cursor. The help message is
cleared when an action is selected.
Soft Keys
Whenthe SoftKeysoption isset toON,thedefaultsoft keysare displayedifno
other operation is in progress.
When the Soft Keys option is set to OFF, the default soft keys are only
displayed when a soft key is pressed, and they disappear if no operation is
performed for 10 seconds.
Key Beep
This optioncontrols whether ornot the keys makea noise when you press them.
MOB Data
This option controls whether MOB data is based on position data, or on dead
reckoning (DR). Dead reckoning normally provides a better indication of the
course to an object in the water, on the assumption that your vessel and the
object are both subject to the same tide and wind effects.
Autopilot Pop Up
Thisoptioncontrols whetherornottheautopilotpopupisdisplayed.Whenset
to ON, if the status and locked heading of the autopilot changes, they are
displayed in a pop up box. The box is removed from the display after two
seconds.
When Autopilot Pop Up is set to OFF, the pop up box is disabled.
Menu Timeout Period
With no timeout set, menus and soft key labels remain displayed until you
clear them by pressing ENTER, CLEAR or the appropriate dedicated key.
Ifyouset avaluehere,themenusand softkey labelswillbe clearedifa keyhas
not been pressed for the specified number of seconds.
This setting does notaffectthe defaultsoft keylabels, which arecontrolled by
the Soft Keys option (see above).
81186_3.book Page 7 Thursday, August 22, 2002 8:23 AM