Filter
Top Products
5-40 hsb
2
PLUS Series LCD Display
Clearing the Current
Track
Press ENTER to return to the track soft keys.
2. Press the TRACK OFF ON soft key to toggle tracks on.
Your vessels trail will be displayed on-screen, with a line joining the
points at the selected interval.
Clearing the Current Track
You can clear the current track from the screen. When you select CLEAR
TRACK, if thecurrent track hasnot beensaved, youhave the optionof savingit.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear the track without saving it in the Track List, press NO.
To save the track in the list, press YES. The Name track soft keys are dis-
played and you should continue asdescribed inthe following section, Sav-
ing and Naming a Track.
Press CLEAR to abort the Clear Track operation.
The current track is cleared from the screen and the default soft keys are
displayed.
Managing Tracks
Althoughitis easyto setupatrack, andthistrack isretainedeven ifyou switch
off your display, you can store a number of different tracks so that you can
reviewthemata laterdate.Thissectionexplainshowto performthefollowing
tasks:
• Save and Name a track.
• Name, Erase and Show an existing track.
Saving and Naming a Track
You can save up to 5 named tracks in the Track List. These tracks can be re-
displayed at a later date.
➤ To save and name the current track:
1. Press the MOREsoftkeyfollowedbytheTRACK LIST soft key. Thetrack list
pop-up and associated soft keys are displayed.
2. Thenext available entry on the track list is highlighted.
(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing track that you no longer require).
D5674-1
TRACK
LIST
MORE¬
TRACK INTERVAL
0.1nm
TRACK
OFF ON
CLEAR
TRACK
SAVE
TRACK
TRACK
LIST
81186_3.book Page 40 Thursday, August 22, 2002 8:23 AM