Filter
Top Products
Chapter 2: Getting Started & Adjusting the Display 2-15
Customizing the
Screen Presentation
Options
The standard radar picture is displayed again,with the active waypoint joined
to your vessel’s position by a dotted line. If the waypoint is off-screen, the
dotted line is extended to the edge of the radar picture.
Figure 2-7: Active Waypoint on a Radar Display
Custom Options - Chart mode
When chart details have been customized in the Chart Set Up menu (as
describedinSection 7.7)theSCREEN softkeycan beused toswitch thecustom
chart options off or on:
When set to ON, all chart options set toCUSTOM in the Customize Chart menu
are displayed; when set to OFF, options set to CUSTOM are not shown.
The factory default for custom chart options is ON.
➤ To switch the customized options on or off:
1. Press the SCREEN default soft key.
2. Press theCUSTOM soft key to togglethe setting from OFF to ON or fromON
to OFF.
To return to the default soft key display, press ENTER.
D3989-2
Active waypoint
SCREEN
CUSTOM
OFF ON
81186_3.book Page 15 Thursday, August 22, 2002 8:23 AM