Filter
Top Products
Chapter 2: Getting Started & Adjusting the Display 2-17
Offsetting the Center
➤ You can use the context sensitive cursor to select and move the enlarged area
in view in the window (the label ZMB is displayed). See Moving and deleting
items with the context-sensitive cursor on page 1-17.
➤ To return to the normal display, press DISPLAY and then press the ZOOM soft
key to set the function OFF.
Alternatively, you can press and hold DISPLAY for 2 seconds. This also
removes any grouped data boxes.
Offsetting the Center
The radar picture is normally shown with your vessel at the center of the
display. However, you can move the center, so that your vessel is offset by up
to 66% of the radius, anywhere on the screen.
Note: You cannot offset the center when the radar display is set to the longest
range scale.
ZMB
D3972-1
Zoom Box, indicating the
enlarged area. You can move this
using the context-sensitive cursor,
to change the image in the Zoom
Window
Zoom Box cursor text
Zoom Window, providing a
times 2 enlargement of the area
shown in the Zoom Box
T
AUTO
IR
3nm
RR
1/2
H-UP
126°T
RADAR ZOOM ( x2 )
CURSOR
BRG
033° R
RNG
1.78nm
ZMB
81186_3.book Page 17 Thursday, August 22, 2002 8:23 AM